Customizing Panel Sizes Receive Updates For This Category

A. If your anchors inadvertently were spaced too far apart, you can extend your horizontal rails using wood blocking cut to fill the void in the extruded cavity.

B-D. Sleeve over your wood blocking by using the same size extruded vinyl. If you do not have any left over waste, please call us at 1.877.778.5733 as we may be able to help you with finding a solution.

Go to Detail Page

A. Measure distance between posts, subtracting 1/4in. from total length for backet compensation.

B. Measure both top and bottom rails to ensure both are the same length before cutting.

D. The rail brackets are designed to allow for up to 1in. of extension beyond end of rails on each side for a total of 2in.

E. Screw self tapping screw in both sides of bracket into the rail.

 

 

Go to Detail Page

A. Measure distance between vinyl posts and cut to the measured length.

B. Measure both top and bottom rail to ensure both are the same length before cutting.

C. Trim last vinyl fence panel as needed to fit within the posts and rails.

 

Go to Detail Page